Vasu International

• Measuring Range:. 200 AC mA, Resolution: 0.1 mA; Measuring Range: 20 ACA, Resolution: 0.01 A; Measuring Range: 200 ACA, Resolution: 0.1 A; Accuracy: ± ( 1.2 % + 5 d )
• Display: 13 mm ( 0.5" ) LCD, 3 1/2 digits. Max. indication 1999; Operating Temp: 0 to 50 ( 32 to 122 ); Operating Humi: Less than 80% RH.
• Data Hold: Available to hold the measuring values on the display; Overload Circuit Protection: 300 ACA max. ( within 1 minute for 20A, 200A range )
• Zero adjustment: Automatic adjustment; Over input: Display shows '1'; Sampling Time: Approx. 0.4 second; Battery: DC 9V battery
• Accessories: Tester, Operation manual

• 3 1/2 manual AC clamp meter;Fully protected in the range;Clamp Open: 52 millimeter
• Standard Accessories: Soft carrying case, probe, manual;Dimension: 123 (H) x 270 (W) x 35 (D) millimeter
• Resolution for DC Voltage and AC Voltage: 1V
• Resolution for AC Current: Up to 200A- 0.1A, 200-1000A: 1A

• Slim jaws simplify measurements within crowded cables improve efficiency and reduce work time
• Filter function eliminates unwanted noise to let you measure close to the 50 Hz/60 Hz fundamental frequency
• White backlight, measured value hold, and auto power off features add convenience
• [AUTO HOLD] function automatically holds the measured value for use in difficult places to see the display

• Clamp on meter:
• 400 Amp AC with voltage test
• Pocket handy size
• Digital clamp mete

• Digital clamp-meter measures AC and DC to 1,000A, AC and DC voltage to 600V, and resistance to 42 megohms
• True RMS sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of waveform
• Clamp measures current without touching or interrupting the circuit, has a jaw opening of 35mm (1.38 inches), and has 10mm (0.39 inches) thick jaws that can open and close independently of one another
• Meter is sized for portability, weighing 150g (5.3oz.), with an overall length of 180mm (7.09 inches). Meets EN safety standards 61010-1, 61010-031, and 61010-2-032, and is rated for CAT III installations to 600V for current measurement and to 300V for voltage

• Remotely log, trend and monitor measurements pinpoint intermittent faults via Fluke Connect
• Inrush measurement to filter out noise and capture motor starting current.
• Measures AC/DC current to 1000A and AC current to 2500 A with iFlex current probe
• Integrated VFD low pass filter for accurate motor drive measurements

• 3½ Digits
• 2000 Counts
• TRMS
• Auto / Manual Ranging
• AC Current upto 1000A
• AC Voltage upto 750V
• DC Voltage upto 1000V
• Resistance upto 20MΩ
• Temperature
• Audible Continuity

• Thin, light, compact body design for one-hand operation
• 18mm triangular jaw allows for easy measurement on small cables
• Large, easy-to-read backlit display
• 200 A ac and dc current and 600 V ac and dc voltage measurement range
• 3000 Ω resistance range, continuity detection
• Zero function allows the display to be cleared for DC measurements
• Data Hold function
• CAT III 600 V safety rating

• Maximum Conductor Size: 32 millimeter.
• Large LCD for easy reading
• Data hold switch freezes reading
• Low battery indication
• Accessories: Test leads, carrying case, manual, drop proof wrist strap

3½ Digit / 2000 Count 400 A AC.
Auto ranging
K Type Thermocouple,
Temperature,
Diode Test 
Audible Continuity
Data Hold, MAX and APO functions

Measuring Parameters:- AC Cuurent, AC Voltage, DC Voltage, Frequency, Resistance, Continuity Check, Diode Test, % Duty Cycles

Display: 3¾ digit liquid crystal display (LCD) with a maximum reading of 3999; Polarity: Automatic, positive implied, negative polarity indication; Over Range: (OL) or (-OL) is displayed.

Operating Temperature: 0°C to 50°C at <70% Relative Humidity; Storage Temperature: -20°C to 60°C, 0 to 80% RH with battery Temperature removed from meter; Accuracy: Stated Accuracy at 27°C ± 50°C, <75% Relative humidity.

Low battery indication is displayed when the battery indication voltage drops below the operating level; Measurement Rate: 3 times per second, nominal; Maximum Jaw Opening: 55mm.

Power: Two 1.5V ‘AAA’ Size Battery; Battery Life: 200 Hours Typical; Accessories: One pair of test leads, Instruction Manual, 1.5V battery (installed), Carring Case.

Key Features : 

Display : 3¾ digit liquid crystal display (LCD) with a maximum reading of 3999.

Polarity : Automatic, positive implied, negative polarity indication.

Overrange : (OL) or (-OL) is displayed.

Zero : Automatic.

Diode Test Function

Audible Continuity Test

Low Battery Indications 

Peak Hold Functions

Max/Min , Zero , Data Hold Functions 

Automatic Power Off

Auto /  Manual Ranging '

40  Segment Bar Graph

• The body weighs only 154g and is 16mm thick, which is light and portable and can be put into a pocket
• The slim and thin jaw of only 10mm can easily fit into tightly packed wires
• 600A AC/DC range (D model), 0.01A high resolution
• Tests voltage, resistance and continuity

• DC current
• DC voltage
• Temperature
• Frequency
• 400Amp.
• True-rms AC/DC current, voltage, temperature, frequency
• Clamp meter, test leads, K-type thermocouple and soft case
• Versatile tool performs most front-line measurement tasks

• 999.0 A ac current measurement
• Cat IV 300V / CAT III 600V safety rated
• 30 mm jaw size for numerous applications
• Resistance range of 40 kΩ.
• Slim, ergonomic design is easy to carry and simple to use
• Easy to read backlight display

• AC current measurements up to 400 A, handling your everyday electrical maintenance need.
• Comes with the TL75 Hard Point™ Test Lead Set offering the convenience of a test lead and probe in one unit with a variety of connections
• Rugged, easy-to-use digital clamp meter with CAT IV 300 V/CAT III 600 V safety rating

• Auto-ranging AC/DC Clamp meter. Auto Power Off. Peak Hold and Data Hold facility.
• 3-3/4 Digits 3999 Counts Backlit LCD with Analogue Bargraph. Frequency Measurement while measuring current. Relative Measurement facility.

• AC Current - Sensing Range1000V
• DC Current - Sensing Range1000V
• BatteryYes
• Model Name/NumberM266

• Least affected by external stray magnetic fields.
• 20mA AC max. in proximity to a 15mm-dia conductor carrying 100A AC.
• Frequency Selector Switch to eliminate the effect of harmonics.
• Resolution 0.1mA
Inc. Accessories: 9097 Carrying Case, R03 × 2, Instruction Manual

•  Equipped to measure both AC and DC current with transformer jaws of large diameters
•  Can measure AC and DC currents up to 2000A.
•  Output terminal for connection to recorders.

• Jaw Size: ?42mm/1.7
• Tests AC/DC Voltage and Current, Resistance, Capacitance, Frequency and Duty Cycle
• Type-K Thermocouple contact temperature measurement
• Diode Check and Continuity Test
• Data Hold and Display Back Light

•  DC voltage range is also available especiallys. checkingemergency battery operated power supply.
•  Can measure temperature using optional probe
•  Tear drop shaped transformer jaws for ease of use

• Digital Phase Indicator with open phase checkers
• Phase indicator designed to check the presence of open phase and also the phase sequence by LED and buzzer at the same time
• Small, lightweight, and portable.

• Frequency Selector Switch to eliminate the effect of harmonics
• Three AC current ranges:40mA/400mA/400A
• Resolution 0.01ma.

• Measure current up to 600A
• Multi-functional testing of AC current, voltage, frequency, resistance and wave peak value
• Non-fuse type protects up to 600 V AC
• Frequency 30.0 Hz to 1000 Hz, Basic accuracy: +/- 0.3 % rdg. +/- 1 dgt
• Resistance, 1000 O/ 10.00 kO, Basic accuracy: +/- 1.5 % rdg. +/- 5 dgt