Vasu International

•  DC voltage range is also available especiallys. checkingemergency battery operated power supply.
•  Can measure temperature using optional probe
•  Tear drop shaped transformer jaws for ease of use

•  Equipped to measure both AC and DC current with transformer jaws of large diameters.
•  Can measure AC and DC currents up to 2000A.
•  Output terminal for connection to recorders.

• Least affected by external stray magnetic fields.
• 20mA AC max. in proximity to a 15mm-dia conductor carrying 100A AC.
• Frequency Selector Switch to eliminate the effect of harmonics.
• Resolution 0.1mA
Inc. Accessories: 9097 Carrying Case, R03 × 2, Instruction Manual

• Digital Phase Indicator with open phase checkers
• Phase indicator designed to check the presence of open phase and also the phase sequence by LED and buzzer at the same time
• Small, lightweight, and portable.

• AC current measurements up to 400 A, handling your everyday electrical maintenance need
• Comes with the TL75 Hard Point™ Test Lead Set offering the convenience of a test lead and probe in one unit with a variety of connections
• Rugged, easy-to-use digital clamp meter with CAT IV 300 V/CAT III 600 V safety rating

• 999.0 A ac current measurement.
• Cat IV 300V / CAT III 600V safety rated
• 30 mm jaw size for numerous applications
• Resistance range of 40 kΩ.
• Slim, ergonomic design is easy to carry and simple to use
• Easy to read backlight display

3½ Digit / 2000 Count 400 A AC.
Auto ranging
K Type Thermocouple,
Temperature,
Diode Test 
Audible Continuity
Data Hold, MAX and APO functions

Key Features : -

Display : 3¾ digit liquid crystal display (LCD) with a maximum reading of 3999.

Polarity : Automatic, positive implied, negative polarity indication.

Overrange : (OL) or (-OL) is displayed.

Zero : Automatic.

Diode Test Function

Audible Continuity Test

Low Battery Indications 

Peak Hold Functions

Max/Min , Zero , Data Hold Functions 

Automatic Power Off

Auto /  Manual Ranging '

40  Segment Bar Graph

Measuring Parameters:- AC Cuurent, AC Voltage, DC Voltage, Frequency, Resistance, Continuity Check, Diode Test, % Duty Cycles

Display: 3¾ digit liquid crystal display (LCD) with a maximum reading of 3999; Polarity: Automatic, positive implied, negative polarity indication; Over Range: (OL) or (-OL) is displayed.

Operating Temperature: 0°C to 50°C at <70% Relative Humidity; Storage Temperature: -20°C to 60°C, 0 to 80% RH with battery Temperature removed from meter; Accuracy: Stated Accuracy at 27°C ± 50°C, <75% Relative humidity.

Low battery indication is displayed when the battery indication voltage drops below the operating level; Measurement Rate: 3 times per second, nominal; Maximum Jaw Opening: 55mm.

Power: Two 1.5V ‘AAA’ Size Battery; Battery Life: 200 Hours Typical; Accessories: One pair of test leads, Instruction Manual, 1.5V battery (installed), Carring Case.

• Jaw opening up to 50mm/2.0 inch.
• Test AC/DC voltage, AC current, resistance
• With optional 500V insulation tester unit
• Diode check and continuity test

• Frequency Selector Switch to eliminate the effect of harmonics
• Three AC current ranges:40mA/400mA/400A
• Resolution 0.01ma.

• Non-contact type probe:
• Indicates the presence of HIGH VOLTAGE by audio as well as visual annunciation with flashing Red LEDs
• Buzzer produces a loud beep which is audible even in loud noisy backgrounds
• Test button to test battery and proper functioning of HV detector

• AC current: 2A, 20A, 200A, 400A (auto ranging).
• AC voltage: 2V, 20V, 200V, 600V (auto ranging).
• Resistance: 200 , 2k , 20K , 200k , 2M , 20M (auto ranging)
• Functions: Data hold, audible continuity, diode test, APO
• Jaw opening: 25 mm (max).

• Clamp on meter:-
• 400 Amp AC with voltage test
• Pocket handy size
• Digital clamp mete

• True RMS:-
• Auto/ Manual.
• 6000 Counts LCD Display with Backlight
• Auto Power Off
• Capacitance, Frequency, Duty Cycle & Temperature Ranges
• Low Battery Indications
• 200 Hrs Battery Life
• Measuring Category : CAT IV 600 V
• DC Voltage 600 mV / 6 / 60 / 600 / 1000 V 

• 1000 A, Average RMS Responding
• Clamp aperture: 33 mm (1.30 in) diameter
• Lightweight 100 g (3.5 oz), and Slim 16 mm (0.63 in)
• Independent-opening double-lever design
• Slim body design, allows easy clamping even for narrow conductors
• No metal (iron core) exposure, ensuring enhanced safety

• Digital clamp-meter measures AC and DC to 1,000A, AC and DC voltage to 600V, and resistance to 42 megohms
• True RMS sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of waveform
• Clamp measures current without touching or interrupting the circuit, has a jaw opening of 35mm (1.38 inches), and has 10mm (0.39 inches) thick jaws that can open and close independently of one another
• Meter is sized for portability, weighing 150g (5.3oz.), with an overall length of 180mm (7.09 inches). Meets EN safety standards 61010-1, 61010-031, and 61010-2-032, and is rated for CAT III installations to 600V for current measurement and to 300V for voltage

• Slim jaws simplify measurements within crowded cables, improve efficiency and reduce work time
• Filter function eliminates unwanted noise to let you measure close to the 50 Hz/60 Hz fundamental frequency
• White backlight, measured value hold, and auto power off features add convenience
• [AUTO HOLD] function automatically holds the measured value for use in difficult places to see the display

• Measure current up to 600A
• Multi-functional testing of AC current, voltage, frequency, resistance and wave peak value
• Non-fuse type protects up to 600 V AC
• Frequency 30.0 Hz to 1000 Hz, Basic accuracy: +/- 0.3 % rdg. +/- 1 dgt
• Resistance, 1000 O/ 10.00 kO, Basic accuracy: +/- 1.5 % rdg. +/- 5 dgt