Vasu International

Features-

 Display 2000 counts                        
 Diode Open Voltage 3.0V                        
 Data Hold                        
 Low Battery Display                        
 Continuity Buzzer <70 ±30
 Display Backlight

VoltAlert technology for non-contact voltage detection.

AutoVolt automatic AC/DC voltage selection. DC millivolts - Range : 600.0 mV, Resolution : 0.1 m.

Low input impedance: helps prevent false readings due to ghost voltage

Large white LED backlight to work in poorly lit areas

True RMS for accurate measurements on non-linear loads.Operating temperature:-10°C to +50°C.Battery life:400 hours typical, without backlight

AC Voltage.
Maximum voltage : 1000V.
Accuracy : Fluke83V: (0.5% +2)
Fluke87V: (0.7% +2) True RMS
AC bandwidth Fluke83V: 5kHz
Fluke87V: 20kHz *
* Use low-pass filter ;3db 1kHz
Maximum resolution : 0.1mV

DC current (20A, 30 seconds maximum )
Maximum Current : 10A
Current Accuracy : Fluke83V: (0.4% +2)
Fluke87V: (0.2% +2)
Maximum resolution : Fluke83V: 0.01mA
Fluke87V: 0.01A

AC current (20A, 30 seconds maximum )
Maximum Current : 10A
Current Accuracy : Fluke83V: (1.2% +2)
Fluke87V: (1.0% +2) True RMS
Maximum resolution : 0.1A

Resistance
Maximum resistance : 50M
Accuracy : Fluke83V: (0.4% +1)
Fluke87V: (0.2% +1)
Maximum resolution : 0.1

Capacitance
Maximum capacitance : 9,999 F
Accuracy : (1% +2)
Maximum resolution : 0.01nF

Frequency
Maximum frequency : 200kHz
Accuracy : (0.005% +1)
Maximum resolution : 0.01Hz

Duty Cycle
Accuracy : (0.2% / khz +0.1%)

Temperature Measurement
Fluke83V, 87V / E: -200.0 C-1090 C

80BK temperature probe -40.0 C-260 C, 2.2 C or 2% , whichever is greater

Conductivity
Maximum conductivity 60.00nS
Accuracy (1.0% +10)
Maximum resolution 0.01nS

Diode
Range3V
Resolution 1mV
Accuracy : (2% +1)

Duty Cycle RangeAccuracy : (0.2% / kHz +0.1%) within

Key Features  ±0.3% DC V basic accuracy, wide 40 Hz to 1. kHz AC V frequency characteristics • Measure up to 10A withs direct input • Dual display lets you check voltage and. frequency simultaneously • Low-pass filter cuts high harmonics (when measuring inverter fundamental waveforms) • USB communications function supports PC measurements (optional)

• 3 Digit Multimeter with Backlight
• True RMS
• 6000 Count
• hFE test
• Torch Function
• Duty cycle test
• NCV

• 600 V Cat III safety rating.
• 50% bigger display with bright white backlight
• Voltage, resistance, continuity, capacitance
• Input terminal for ac and dc current measurements to 10 A current
• Diode test, data hold

• 4 Digits
• 9999 Counts
• TRMS
• Auto / Manual Ranging
• DC Voltage upto 999.9V
• AC Voltage upto 750.0V
• DC Current upto 9.999A
• AC Current upto 9.999A
• Resistance upto 99.99MΩ
• Capacitance upto 9.999mF

• 600 V Cat III safety rating
• 50% bigger display with bright white backlight
• Voltage, resistance, continuity, capacitance
• Input terminal for ac and dc current measurements to 10 A current
• Diode test, data hold

• Value Storage
• Indication Of Negative Values On The Analog Scale - Automatic Data Hold - Auto-ranging / Manual Range Selection - Continuity Test
• Signaling in the case of a blown fuse - Power economizing circuit - Overload Warning - Protective holster for rough duty

Features:-
•  Elegant and easy-to-use cabinet.
•  Large display with 6000 counts and Backlight.
•  Enhanced current measuring function using an external clamp sensor
•  Two detachable holders, flat and wing type
•  Accurate reading with True RMS
•  Safety Standard IEC 61010-1 CAT IV 300V / CAT III 600V

Features:-

• Compact in Size, Light in Weight and Simple in Use.
• Double moulding provides comfortable and good feeling in hand.
• Penlight illuminates brightly the point to be measured, even in dark place.
• Backlight LCD is highly visible, even in darkness.
• Unique wrapping mechanism for test lead in the rear side compartment.
• Unique protection mechanism for the test prod for safety.
• All ranges including Ohm range are protected against overload voltage of 600V.

Features:-

• Elegant shiny-black finished
• Comes with user-friendly Hard case.
• Large Display
• Accurate reading with True-RMS technology
• Electronic protection (no fuse!) on ohm and continuity ranges
• Safety Standard
• IEC 61010-1 / 61010-031 / 61010-2-033 CAT III 300V / CAT II 600V.

Inc. Accessories:   9188 (Hard case), CR2032 × 1, Instruction manual

Features:-
•  Auto range and manual range selector provided. (with range hold feature)
•  Resistance range provides audible continuity test.
•  Automatically turns power off in about 30 minutes to conserve battery life.
•  Direct current measurement up to 10A AC and DC.
•  With Holster. 

• 600 V Cat III safety ratings
• 50% bigger display with bright white backlight
• Over-voltage indicator
• Frequency and temperature measurement
• Voltage, resistance, continuity, capacitance
• Input terminal for ac and dc current measurements to 10 A current
• Diode test, data hold

Sensing: Average sensing

Basic Accuracy: ±(0.5 percent RDG + 1 DGT)

Display: 3.75 digit, maximum 3999 counts

Large LCD display

Display Size: 17.5 mm

• Capacitance- range:- 200pf/2nf/20nf/200nf/2μf/20μf/200μf/2000μf, accuracy: plus or minus(2.5 percent plus 5digit), resolution: 0.1pf
• Inductance: 200μh/2mh/20mh/200mh/2h/20h, accuracy: plus or minus(2.0 percent plus 5digit), resolution: 0.1μh
• Resistance: 20 200 2k 20k 200k 20m

• 6000 Count LCD display with pleasant white backlit.
• AC/ DC current range upto 20A.
• Resistance, Capacitance, Diode & Continuity measurement facility
• Selectable Frequency & Duty Cycle measurement.

• Count: 4000 ( 3 1/2 Digit ) Back Light for Display,Small light weight design - Pocket Size, Easy to carry
• Voltage: DC: 1000 volts(± 0.8% + 4); AC: 750 volts(± 1.5% + 4); Current: DC: 10 A(± 1.5% + 4); AC: 10 A(± 2% + 4).
• Resistance, Capacitance, Duty Cycle (%) & Frequency measurment,Diode Test, Continuity test with buzzer & Data Hold, REL Measurement
• Long battery life with auto power Off, 1 year MECO warranty, Included Test leads (Pair), 2AAA batteries (installed), Instruction manuals